Wednesday, October 5, 2011

Vulcan 750

Shes a 97 however still up and kicking just like alot of bikes that have sat for quite some time it needed a few things.

Battery- easy fix pop the seat after removing the 2 bolts for the seat from inside the rear glove box. Then remove the negative cable first then the positive. This bike takes a CB14L-A2 from parts unlimited. When you install a battery positive cable first then negavtive.
MAKE SURE THE KEY IS OFF!

Clean the carbs- basicly cleaning carbs is a tedius task that may need to be done more than once if not cleaned right. Ill be puttin a basic carb cleaning section up tomorrow

Install new float needles- Float needs are an essential part of a carborated bikes fuel system. They can be thought of as maybe a fuel preasure regulator or even more simply the finger in the hole to stop a leak.
There are a few thing that can cause them to fail and those will also be explained in a later post signes of bad float needles and seats as well!

All and all this vulvan 750 is back on the road and I woule love to here some woahs of your vulcan so more can be on the road.




No comments:

Post a Comment